Bird's Performance Coatings - HomePowder CoatingCeramic CoatingsPricingAboutContactsLinks
 
PRICE LIST - we pay the tax so you don't!

Bird's Performance Coatings has competitive pricing. Don't be fooled into thinking that the finishes which are applied to 'fences' and other industrial applications are 'good enough' or comparable to the high quality of automotive finishes. The prices listed are simply to help you budget your project. We cannot and do not estimate prices over the phone or not brought on site. Although this might appear as restrictive, we usually cannot guarantee a price until the project is complete since we focus on each project individually.

Prices are for parts that are in ready-to-coat condition. This means that they have been totally disassembled, degreased, and stripped if necessary. Parts must be in good condition. They must not be damaged or cracked since the coatings are baked on. Additional charges will apply to parts not brought in a ready-to-coat condition.

If we determine, upon inspection, that the parts are not in ready-to-coat condition, we will give you a general estimate of how much the prep work would cost. (Our shop rate is $50/hour.) Sandblasting and chemical stripping prices are based on individual needs and requirments. We will also let you know if any parts are not fit for coating.

The price includes the final prep work (washing, iron phosphate dip, masking, hole plugging, etc.) No hidden fees! No charges for color change!

Prices are in Canadian dollars. They do not include shipping & handling. Prices subject to change without notice.


POWDER COATING PRICE LIST- taxes already included!

Automotive Parts
     
Qty
Price
Accelerator & Brake Pedal Arms @ 20
Accelerator, Brake & Clutch Arms @ 30
Air Cleaner Assembly (all parts) @ 30
Air Cleaner Cover @ 25
Alternator Shell @ 35
Antenna @ 5
Battery Box’s Metal Only @ 20
Blower Case @ 85
Brackets, misc. & up 6
Brake Backing Plate/mtg brkt pr  50
Brake Caliper (each) @ 35
Brake Drum (pair) pr  75
Brake, Master Cylinder @ 35
Brake, Master Cylinder Cover @ 15
Brake, Rotor Drilled (each) @ 75
Brake, Rotor (each) @ 35
Bumper (car, truck & tube) & up 55
Carb Body @ 45
Carb Bowls @ 15
Coil Springs (pair) pr  60
Control Arms (per side) pr  55
Differential Cover @ 25
Door Handle @ 10
Door Posts pr  30
Drive Shaft @ 65
Drive Shaft Yokes (pair) pr  25
Edges Only @ 40
Emblem @ 5
Engine Block V8 & up 400
Engine Block V6 & up 350
Engine Block I4/I5 & up 250
Engine Heads (pair) pr  145
Gear Box @ 85
Gear Box Cover @ 40
Grill @ 45
Harmonic Balancer @ 15
Hood Hinges (pair) pr  45
Horn @ 10
Inner Fender Wells pr  100
Intake Manifold (4 cylinder) @ 60
Intake Manifold (6 cylinder) @ 70
Intake Manifold (8 cylinder) @ 75
Intake Manifold (T.P.I.) @ 120
Intake Manifold (Tunnel Ram) @ 100
Ladder Bars (pair) pr  75
Leaf Spring Shackles (set) 25
Leaf Springs (set) @ 125
License Plate Bracket @ 15
Luggage Rack & up 25
Motor Mounts (4 pieces) 4 45
Nut/Bolt/Washer (each) @ 1
Nerf Bars Jeep/Pickup pr 80
Oil Pan @ 80
Pitman Arm @ 15
Pulley, Engine Belt (each) @ 10
Radiator Support @ 85
Radiator Fan @ 25
Rear Axle Housing @ 110
Rear Axle Housing (narrowed) @ 85
Spindle Assembly (pair) pr  50
Steering Center Link @ 25
Steering Knuckle pr  30
Sway Bar @ 30
Tail Housing @ 65
Thermostat Housing @ 5
Tie Rods (each) @ 20
Timing Chain Cover @ 30
Tow Hitch @ 30
Tow Hitch Receiver @ 70
Tow Hooks (pair) pr  12
Traction Bars (pair) pr  50
Transmission, Automatic @ 125
Transmission, Bell Housing @ 55
Transmission, Fluid Pan @ 20
Transmission, Manual @ 75
Valve Cover V8 or V6 @ 45
Valve Cover, 4 cylinder @ 60
Valve Cover, 6 cylinder In-line @ 65
Water Inlet @ 5
Water Pump @ 30
Wheel pr 120
Wheel 4 200
Wheel, (all sides) @ 60
Wheelie Bars & up 55
Wiper Arms (pair) pr  25

 
Motorsports Parts
     
Boats
Qty
Price
5 Gal Metal Tank (neutralized or new) @ 40
Clamps & up 5
Cover Metal Only over 50 HP @ 85
Cover Metal Only to 50 HP @ 50
Cylinder Head over 50 HP @ 40
Cylinder Head to 50 HP @ 25
Engine brackets & up 5
Engine Head Covers & up 5
Lower Unit Exhaust Housing over 50 HP @ 125
Lower Unit Exhaust Housing to 50 HP @ 80
Lower Unit Gear Housing over 50HP @ 65
Lower Unit Gear Housing to 50 HP @ 45
Propeller @ 40
Railing ft 1
Tiller Arm @ 20
     
Bicycles
   
Bicycle Forks
@
25
Bicycle Frame
@
75
Crank assembly
@
25
Fender
@
20
Handle bars
@
25
Sprockets
& up
5
Steel Pedals
pr
20
     
Sleds & ATV
A-Arms
pr
20
ATV Frame
& up
200
Battery Box
@
15
Brackets and Small Control Levers
& up
5
Caliper
@
20

Crash Guard

@
25
Dash Plate
@
10
Foot Pedals
@
5
Foot Pegs
pr
10
Handlebars
@
10
Racks
& up
40
Rims (up to 14")
pr
80
Rotor
@
20
Skis
pr
60
Sled Frame
& up
75
Stabilizer Arms & Rods
& up
10
Suspension Springs
pr
20
Engine Components (see Motorcycles)
Motorcycle Parts
     
Qty
Price
Brackets, misc. & up 5
Air Cleaner Back Plate @ 10
Air Cleaner Cover @ 15
Axle & Nut @ 10
Axle Spacer @ 5
Battery Box @ 15
Battery Side Cover @ 20
Battery Strap @ 5
Battery Top Cover @ 10
Belt Drive Pulley @ 20
Brake Drum @ 30
Brake Linkage @ 10
Brake Pedal Arm @ 10
Brake Pedal Mount @ 10
Caliper @ 30
Caliper Mount @ 15
Cam Cover, Flat Side @ 40
Cam Cover (inline 4) @ 45
Cam Cover, Nose Cone 2cyl @ 35
Cam Cover, XL @ 40
Chain/Belt Guard, FL @ 25
Chain/Belt Guard, lower @ 15
Chain/Belt Guard, upper @ 25
Clutch Release Arm @ 15
Coil Cover @ 15
Crash Bar (lg) @ 65
Crash Bar (sm pair) pr 40
Cylinder Head pr 100
Cylinder Head (single) @ 40
Cylinder Head (double) @ 50
Cylinder Head (triple) @ 75
Cylinder Head (four) @ 100
Cylinder Head (six) @ 120
Cylinder Jug pr 75
Cylinder Jug (single) @ 100
Cylinder Jugs (double) @ 150
Cylinder Jugs (triple) @ 150
Cylinder Jugs (four) @ 200
Cylinder Jugs (six) @ 100
Dash & Tank Panel @ 15
Dash Cover @ 15
Engine Skid Plate @ 25
Exhaust Heat Shield @ 10
Exhaust Mount Rings (pair) pr 10
Exhaust Pipes (high heat powder) @ 50
Fender (bobbed rear) @ 60
Fender Front (large) @ 65
Fender Rear (large) @ 75
Fender Front (small) @ 45
Fender Strut (pair) @ 45
FL Fork Cans (pair) @ 20
Foot Board (pair) @ 35
Foot Peg (pair) @ 15
Foot Peg Stand-Off (pair) @ 15
Fork, Lower Legs (pair) @ 65
Fork, Springer (4 pieces) 4 145
Frame Dirt / Enduro &up 150
Frame Sport Bike Front Ring &up 100
Frame Sport Bike Extended &up 150
Frame Rigid/Square Tube &up 200
Frame Sub Frame Tail &up 75
Frame Full & Sub Frame &up 300
Frame Simple Tube &up 200
Gas Tank Fatbob (2 pc) 2 165
Gas Tank, 1 - 2 gallon @ 100
Gas Tank, 3 - 5 gallon @ 150
Hand Levers (pair) @ 20
Handlebar Clutch Clamp (2 pc) 2 20
Handlebar Master Cylinder @ 20
Handlebar Riser Clamp only @ 15
Handlebar Risers & Clamp @ 30
Handlebar Switch Housing @ 15
Handlebars @ 30
Headlight Bucket, FL style @ 30
Headlight Mount Bracket @ 5
Headlight Mount, XL @ 20
Headlight Retaining Ring @ 5
Headlight Shell @ 25
Highway Peg Stand-Off @ 10
Horn Bracket @ 5
Horn Cover @ 10
Ignition Module Cover, XL @ 20
Intake Flanges @ 10
Intake Manifold @ 15
Kick Stand @ 20
Kick Start Arm @ 10
License Plate Bracket @ 20
Master Cylinder Lid @ 5
Master Cylinder (rear) @ 10
Motor Cases (pair) pr 125
Motor Cases, XL (pair) pr 180
Nut/Bolt/Washer (each) @ 1
Oil Filter Mount @ 10
Oil Pump @ 20
Oil Tank @ 50
Points Cover @ 10
Primary Cover @ 40
Primary Derby Cover @ 15
Primary Inspection Cover @ 10
Primary (inner) @ 30
Pushrod Tube, 1 Piece (set of 4) @ 20
Pushrod Tube, 3 piece (set of 12) @ 30
Regulator Bracket @ 10
Regulator Cover @ 10
Rocker Box (3 pc) pr 80
Rocker Box, D-Ring pr 35
Rocker Box, Pan Head pr 40
Rocker Box, Shovel/Knuckle Head pr 55
Saddlebag Brackets (pair) pr 15
Shifter Arm  @ 10
Shifter Bracket @ 10
Shifter Linkage @ 10
Shifter Peg @ 5
Shock Covers (pair) pr 40
Sissy Bar @ 25
Sissy Bar Mount (2 pc) 2 25
Solenoid End Cover @ 10
Speedo Housing @ 10
Sprocket @ 15
Sprocket Cover, XL @ 15
Swing Arm, Dual Rail @ 60
Swing Arm, Softail @ 40
Tail Light Housing @ 10
Tail Light/License Plate Mount @ 20
Tappet Blocks (pair) pr 35
Tranny, Base Plate @ 20
Tranny, 2cyl Bottom End Case pr 75
Tranny, 3cyl Bottom End Case pr 100
Tranny, 4cyl Bottom End Case pr 130
Tranny, Case @ 80
Tranny, End Cover @ 20
Tranny, Oil Pan @ 25
Tranny, Ratchet Top @ 25
Triple Tree (pair) pr 65
Turn Signals (pair) pr 25
Visor, Tail/Blinker/Hdlight (each) @ 5
Wheel with Dimples @ 120
Wheel, (with spokes) @ 70
Wheel, Aluminum (Cast) @ 55
Wheel, Aluminum (Mag) @ 70
Wheel, Solid Disk @ 60
Wheel, Spoke Hub @ 35
Wheel, Spoke Rim (w/o spokes) @ 45
Coated Engine Bay

CERAMIC COATINGS PRICE LIST*- taxes already included!

*Add 45% for Racing Formula Ceramics


Automotive
     
  Qty Price
***** V8 *****
   
Exhaust Manifolds
pr 150
Block Huggers
pr 175
Shorties
pr 200
3/4 Lengths Under 1 3/4 inch
pr 250
Full Length 1 3/4 inch + (Race)
pr 300
Sidepipe Header
pr 425
Sidepipes
@ 125
Intake Manifold Aluminum/Steel
@ 175
Exhaust Tubing (see Tubing)
ft **
Mufflers (select)
@ 75
     
***** V6 *****
   
Exhaust Manifolds
pr 100
Shorties
pr 150
Competition Headers
pr 250
Exhaust Tubing (see Tubing)
ft **
Mufflers (select)
@ 75
     
***** V4 *****
   
Exhaust Manifolds
pr 75
Shorties
pr 125
Competition Headers
pr 150
Exhaust Tubing (see Tubing)
ft **
Mufflers (select)
@ 75

 

Turbo Chargers
   
Turbo  (hot side only)
& up
85
Turbo  Elbow
& up
55
Motorcycle
   
Qty
Price
4 into 1 (2 piece) Header
@ 200
4 into 1 (5 piece) Header
@ 250
Twin Pipes
@ 175
Quad Pipes
@ 400
Twin Jugs
pr 150
4 Cyl. Barrels
@ 200
Single (1 or 2 piece) (see Tubing)
@ 100
   

 

Sled
     
  Qty Price
Muffler
&up
60
Stingers/Baffles
@
40
Y-Pipes
@
30
Single Pipe with manifold
@
100
Dual Pipe with manifolds
@
200
Triple Pipe with manifolds
@
300
   

 

Tubing
   
Qty
Price
1 - 1.5" Tubing
ft
25
1.75 - 2.75" Tubing
ft
30
3 - 4" Tubing
ft
35
4.25 - 5" Tubing
ft
40
5.25 - 6" Tubing
ft
45
Ref: Approximetely $35/square foot

Notes: Surface Area = (2 • π • r²) + (2 • π • r • height)
(Square inches per foot tubing 1" pipe = 40 square inches)
1.5" pipe = 60 square inches
2" pipe = 82 square inches
3" pipe = 127 square inches
4" pipe = 176 square inches (more than one square foot)
5" pipe = 228 square inches
6" pipe = 283 square inches


DRY FILM LUBRICANTS PRICE LIST- taxes already included!

We have a complete list of prices soon to be posted.  

 

Disclaimers

A few words about warranties, refunds and payment policies. A few years ago powder coating companies held out warranties, some as long as ten years. Today we don't see that any more, for one reason, powder coating is a much better product than it used to be so failures have been minimized. Another reason is that industrial manufacturers of powder and ceramic coatings offer no warranty of any sort on their products. This puts applicators in a difficult position to take full responsibility for their applications. Needless to say there are few if any written warranties for coatings applications. Bird's Performance Coatings will help resolve any issues with product application or delamination that may occur but like our competitors we cannot offer any guaranties or warranties not expressed by the manufacturers. We recommend that you shop around and find what works best for you as a consumer. There are no refunds, reimbursments, warranties or liabilities of any kind that we will assume for you, so please make sure that what we do for business is what you want. Subjective critisisms will not be tolerated. While we allow anyone to have there own opinion, we maintain our right to do things the way we wish with the skills and talents we have and not in comparison with anyone else. All the work represented on this website is the sole property of Bird's Performance Coatings, Inc. All branding logo's wording, etc. belonging to any other company is for reference only and is in no way an indication of afilliation with those companies.Thank you. Managment at Bird's Performance Coatings, Inc.


Home | Powder Coating | Ceramic Coating | Pricing | About Us | Contact Us | Links

Bird’s Performance Coatings, Inc. – 253 Bell Street, Port Colborne, ON, Canada, L3K 1J2

289-836-9460

Powered by "The Bird"